Nard Digest, Vol 25, Issue 2

Michiel Schriever m.schriever at tendrissolutions.nl
Fri Nov 18 13:06:15 CET 2016


Hi Ronny,

Thank you for the supplied image. I've tried it, but it behaves exactly 
the way the SDK has been behaving. I'll debug this issue further next 
week, for now I'll continue without the serial port.

Thanks again,
Michiel


On Fri, 18 Nov, 2016 at 10:34 AM, Ronny Nilsson 
<rln-nard at arbetsmyra.dyndns.org> wrote:
> 
> Hi Michiel
> Could you try this image in you RPi 3B?
> http://www.arbetsmyra.dyndns.org/~rln/nard-devel-161118.img.gz
> At least it's working fine on my device. But any help with testing is 
> welcome.
> 
> /Ronny
> 
> 
> 
> ------------------------------------------
>>  Hello
>>  This is a bit strange. I'm thinking of creating a devel branch 
>> example
>>  image which is known to work. Then you could perhaps try it?
>> 
>>  /Ronny
>> 
>> 
>>  -----------------------------------------
>> 
>>  > Hi Ronny,
>>  >
>>  > After further testing it still won't show up in the network. I've 
>> added
>>  > a static IP and a small program to toggle a GPIO pin which I 
>> monitor
>>  > with a scope. But it still won't show up or do anything with the 
>> GPIO
>>  > pin. The ethernet LEDs are lit and it looks like ethernet should 
>> work
>>  > (one of the LEDS flashes if I probe the network) but it doesn't.
>>  > The status LED (next to the SD-card) flashes about once every 
>> second
>>  > and my SD-card is still readable by a normal computer, so no 
>> broken
>>  > image at least.
>>  > Not sure how to continue, for now I'll work with the master 
>> branch and
>>  > I guess I'll figure out how to add the serial port. Maybe you can 
>> point
>>  > me in the right direction how to add the serial port.
>>  >
>>  > Thanks so far,
>>  > Michiel
>>  >
>>  > On Sat, 12 Nov, 2016 at 12:00 PM, 
>> nard-request at arbetsmyra.dyndns.org
>>  >
>>  > wrote:
>>  > > Send Nard mailing list submissions to
>>  > > 	nard at arbetsmyra.dyndns.org
>>  > >
>>  > > To subscribe or unsubscribe via the World Wide Web, visit
>>  > > 	http://www.arbetsmyra.dyndns.org/mailman/listinfo/nard
>>  > > or, via email, send a message with subject or body 'help' to
>>  > > 	nard-request at arbetsmyra.dyndns.org
>>  > >
>>  > > You can reach the person managing the list at
>>  > > 	nard-owner at arbetsmyra.dyndns.org
>>  > >
>>  > > When replying, please edit your Subject line so it is more 
>> specific
>>  > > than "Re: Contents of Nard digest..."
>>  > >
>>  > >
>>  > > Today's Topics:
>>  > >
>>  > >    1. Re: Nard Digest, Vol 25, Issue 1 (Michiel Schriever)
>>  > >    2. Re: Nard Digest, Vol 25, Issue 1 (Ronny Nilsson)
>>  > >
>>  > >
>>  > > 
>> ----------------------------------------------------------------------
>>  > >
>>  > > Message: 1
>>  > > Date: Fri, 11 Nov 2016 15:49:07 +0100
>>  > > From: Michiel Schriever <m.schriever at tendrissolutions.nl>
>>  > > Subject: Re: Nard Digest, Vol 25, Issue 1
>>  > > To: <nard at arbetsmyra.dyndns.org>
>>  > > Message-ID: <1478875747.3461.0 at mail.tendrissolutions.nl>
>>  > > Content-Type: text/plain; charset="utf-8"; format=flowed
>>  > >
>>  > > Hi Ronny,
>>  > >
>>  > > It is indeed the network functionality, it doesn't show up 
>> anymore in
>>  > > the scan. I don't know for sure if the led is "slowly" 
>> flashing, it
>>  > > looks a lot like the error flashes you get with the raspbian 
>> image if
>>  > > there is something wrong, except that it keeps on flashing.
>>  > > I'll try to connect a led to some GPIO and try to make it flash 
>> with
>>  > > pigpio. I'll report back later.
>>  > >
>>  > > With kind regards,
>>  > > Michiel
> 


More information about the Nard mailing list