console pi-zero-w

David Thomson dthomson at
Mon Jun 3 19:33:06 CEST 2019

Tried it and all is good now.

Thank you!

On Sat, Jun 1, 2019 at 3:30 AM Ronny Nilsson <rln-nard at>

> Hi David
> The same method should work in Nard too. Add
>         dtoverlay=pi3-miniuart-bt
> to /boot/config.txt Doesn't it work for you?
> /Ronny
> ---------------------------------------------
> > I have compiled the CONSOLE application and need what I believe is
> likely a
> > very simple change to it that I cant find. My hardware setup is based on
> > the pi-zero-w which uses the PL011 UART port by default for bluetooth
> > instead of the serial port. In raspbian you can put a file called
> > pi3-miniuart-bt in the /boot/config.txt and this switches it back so you
> > can use the /dev/ttyAMA0 for the built in UART communications. Is there a
> > way to do this in NARD? Love the concept of this tool, hoping to use it
> for
> > controlling remote serial devices over wifi using the pi-zero-w platform.

David Thomson

*Pineapple Hospitality Company*CIO
o| 425.974.7116 c| 425.471.1197

*STAYPINEAPPLE, an Artful Hotel New York*
Now Open in Midtown Manhattan

More information about the Nard mailing list